Move the telescope to its park position, stop all motion (or restrict to a small safe range), and set AtPark to True.

Namespace: ASCOM.DriverAccess
Assembly: ASCOM.DriverAccess (in ASCOM.DriverAccess.dll) Version: 6.0.0.0 (6.1.1.2619)

Syntax

C#
public void Park()
Visual Basic
Public Sub Park
Visual C++
public:
virtual void Park() sealed

Implements

ITelescopeV3..::..Park()()()()

Remarks

Raises an error if there is a problem communicating with the telescope or if parking fails. Parking should put the telescope into a state where its pointing accuracy will not be lost if it is power-cycled (without moving it). Some telescopes must be power-cycled before unparking. Others may be unparked by simply calling the Unpark()()()() method. Calling this with AtPark = True does nothing (harmless)

See Also